20Y-06-41113 Komatsu PC200-8 PC220-8 PC240-8 Main Wire Harness
Part number 20Y-06-41113 is the Main Wire Harness used on Komatsu PC200-8, PC220-8, PC240-8 excavators. This aftermarket replacement from TOPARTS is designed to fit in place of the original without cutting, splicing or rerouting.
Specifications
- Part Name: Main Wire Harness
- Part Number: 20Y-06-41113, 20Y0641113
- Condition: Aftermarket new
- Product Weight: 13 kg / 28.66 lbs
- Brand: TOPARTS
- Feature: Original connector layout; plug-and-play installation
Applicable Models
Komatsu PC200-8 PC220-8 PC240-8, etc
Its Role in the Machine
Because it runs through the most exposed areas of the machine, the main harness takes more abuse than almost any other electrical part. Swinging, vibration, dust, washdowns and rodents all take their toll, which is why it is one of the most commonly replaced harnesses on older machines.
Where the engine harness serves the engine, the external or main harness serves the whole machine. It connects the major systems of the excavator, so when it is damaged the symptoms can appear in places that seem unrelated: lights, gauges, solenoids, starting and more.
Komatsu excavators are known for long service lives, and many keep working well past the point where their original wiring has aged. A new harness is often the key to keeping an older Komatsu reliable.
Common Symptoms of a Failing Harness
You may notice:
- Hydraulic functions slowing down or stopping because solenoids lose signal
- Several unrelated circuits failing at once
- Blown fuses that keep recurring with no obvious cause
- Rodent damage, crushed sections or wires worn through where the harness rubs the frame
- Monitor warnings that disappear when the machine is stopped
If these symptoms persist after checking fuses, batteries and grounds, the wiring itself is the next thing to suspect.
Installation Guide
- Disconnect the battery isolator before starting.
- Check every ground strap and clean its contact surface to bare metal.
- Add protective sleeving wherever the old harness showed signs of rubbing.
- Test lights, horn, solenoids and the monitor before refitting covers.
Confirming Fitment
Model names are not always enough to confirm fitment, because manufacturers sometimes change harness designs within a model's production run. Check the part number on your existing harness, or send us your machine model and serial number, and we will check it for you.
Repair vs. Replacement
Harness repairs are hard to do well in the field. Moisture gets into joints, tape loosens with heat, and intermittent faults come back. Replacing the harness gives you factory-style connections throughout and makes future troubleshooting far simpler.
Common Questions
How do I know it will fit my machine?
Match the part number on your old harness, or send us your machine model and serial number and we will confirm before you order.
How long does shipping take?
Orders are shipped by express courier such as DHL, FedEx, UPS or TNT, and you will receive a tracking number by email as soon as your parcel leaves our warehouse.
Can I replace only part of the harness?
For a reliable result we recommend replacing the complete harness, since the rest of the old wiring has aged under the same conditions.
Order & Delivery
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





