0002676 Hitachi excavator Internal Wire Harness for EX400-5 EX450H-5
Keep your Hitachi EX400-5 EX450H-5 working with the TOPARTS 0002676 Excavator Internal Wire Harness. It replaces the original harness one-for-one and is built for the vibration, heat and dirt that come with daily work on site.
Part Information
- Part Name: Excavator Internal Wire Harness
- Part Number: 0002676, 0002676=0003385, 00026760003385
- Condition: Genuine new
- Product Weight: 5 kg / 11.02 lbs
- Brand: TOPARTS
- Feature: Original connector layout; plug-and-play installation
Applicable Models
Hitachi EX400-5, EX450H-5
Function Overview
Inside the cab, this harness ties the monitor panel, controller, key switch and control switches into one circuit network. When it starts to fail, the first signs are usually in the cab itself: dead switches, flickering displays or controls that respond only some of the time.
The internal harness lives inside the operator's cab and connects everything the operator touches and sees: the monitor, switch panels, joysticks, key switch, controllers and relays. It is the link between the operator's commands and the rest of the machine.
Hitachi excavators are popular on the used market, and harness replacement is one of the most effective ways to restore an older Hitachi to dependable everyday use.
Looking After Your Wiring
Once the new harness is fitted, a quick look during routine services goes a long way. Check for rubbing points, loose clamps and oil contamination, and keep the engine bay and battery area clean so that debris does not build up around the wiring.
Planning the Repair
An excavator sitting idle waiting for parts costs money every hour. Having the correct harness on hand means the repair becomes a scheduled job instead of an emergency, and the machine is back at work as soon as installation is finished.
Installation Tips
- Remove the seat or console covers as needed to get clear access.
- Unplug the monitor and controller connectors carefully and check their locking tabs.
- Route the harness exactly as the original to avoid pinching under floor plates or seat rails.
- Test every switch and the monitor before refitting the panels.
Made to Last on the Job Site
Each harness is produced under strict quality control, with wire gauges, colours and connector types matched to the original specification. Terminals are crimped for secure contact, and the bundle is protected with sleeving where the original used it.
How to Tell It Is Time for a New One
You may notice:
- Key switch or start circuit failing intermittently
- Switches on the console that do nothing or work only sometimes
- Monitor flickering, going blank or resetting while working
- Burnt smell or discoloured connectors behind panels
- Joystick or work mode functions not responding
If these symptoms persist after checking fuses, batteries and grounds, the wiring itself is the next thing to suspect.
Order & Delivery
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





