0004307 Internal Wire Harness for ZX330-3G ZX350-3G ZX350 ZX360 ZX370 Hitachi Excavator
Electrical faults can stop an excavator as surely as a mechanical failure. The 0004307 Internal Wire Harness replaces damaged or aged wiring on Hitachi ZX330, ZX330-3G, ZX330-HHE, ZX330LC-3G, ZX350H, ZX350H-3G excavators and returns the affected circuits to dependable operation.
Function Overview
The internal harness lives inside the operator's cab and connects everything the operator touches and sees: the monitor, switch panels, joysticks, key switch, controllers and relays. It is the link between the operator's commands and the rest of the machine.
Protected from weather but not from wear, the cab harness flexes every time a seat is adjusted, a console is moved or a panel is opened. Over the years, these small movements loosen terminals and fatigue wires, especially behind the seat and under the floor plate.
Hitachi ZAXIS and EX series machines combine electronic engine control with electronically managed hydraulics, so both systems depend on sound wiring to deliver their rated performance.
Check Fitment Before Ordering
Model names are not always enough to confirm fitment, because manufacturers sometimes change harness designs within a model's production run. Check the part number on your existing harness, or send us your machine model and serial number, and we will check it for you.
Before and During Installation
- Remove the seat or console covers as needed to get clear access.
- Unplug the monitor and controller connectors carefully and check their locking tabs.
- Route the harness exactly as the original to avoid pinching under floor plates or seat rails.
- Test every switch and the monitor before refitting the panels.
How to Tell It Is Time for a New One
Typical signs include:
- Joystick or work mode functions not responding
- Key switch or start circuit failing intermittently
- Switches on the console that do nothing or work only sometimes
- Faults that appear when the seat or console is moved
Intermittent faults like these are classic signs of ageing wiring, and they rarely improve on their own.
Why a New Harness Beats Patching
Patching wiring takes time: tracing the fault, cutting, crimping and sealing, often in an awkward position. When the insulation is hardened along the whole length, that time is better spent fitting a new harness that solves every weak spot at once.
Looking After Your Wiring
Replace damaged clamps and protective sleeving whenever you find them. A harness that is allowed to move against the frame will wear through eventually, no matter how good the wire is.
Part Information
- Part Name: Internal Wire Harness
- Part Number: 0004307
- Condition: Aftermarket new
- Product Weight: 8 kg / 17.64 lbs
- Brand: TOPARTS
- Feature: Matches original routing and length; durable, heat-resistant insulation
Applicable Models
Hitachi ZX330, ZX330-3G, ZX330-HHE, ZX330LC-3G, ZX350H, ZX350H-3G, ZX350K, ZX350K-3G, ZX350LC-AMS, ZX350LC-HCME, ZX350LCH-3G, ZX350LCK-3G, ZX360LC-HHE, ZX370MTH
Payment & Shipping
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





