6745-81-9210 Injector Wire Harness for Komatsu
Electrical faults can stop an excavator as surely as a mechanical failure. The 6745-81-9210 Injector Wire Harness replaces damaged or aged wiring on Komatsu PC300-7, PC340-7E0, PC350LL-7, SAA6D114E, WA430 excavators and returns the affected circuits to dependable operation.
Its Role in the Machine
On a modern diesel, each injector opens on a precisely timed electrical pulse from the ECM. The injector harness carries those pulses, so its condition directly decides whether fuel is delivered at the right moment and in the right amount to each cylinder.
The injector harness is short, but it carries some of the most critical signals on the engine. A weak connection on a single injector circuit can make one cylinder go dead, causing vibration, smoke and a noticeable loss of power.
Komatsu excavators are known for long service lives, and many keep working well past the point where their original wiring has aged. A new harness is often the key to keeping an older Komatsu reliable.
How to Tell It Is Time for a New One
Watch for these symptoms:
- Hard starting and reduced power under load
- Rough idle and increased engine vibration
- One or more cylinders misfiring
- Oil-soaked, brittle or cracked harness insulation under the valve cover
If these symptoms persist after checking fuses, batteries and grounds, the wiring itself is the next thing to suspect.
Confirming Fitment
Model names are not always enough to confirm fitment, because manufacturers sometimes change harness designs within a model's production run. Check the part number on your existing harness, or send us your machine model and serial number, and we will check it for you.
Tips for a Smooth Installation
- Clean the area around the valve cover thoroughly before opening it, so no dirt reaches the injectors.
- Inspect injector terminals and nuts; tighten to the specified torque.
- Replace the valve cover gasket and any pass-through seals while you are in there.
- Clear codes and check that the engine runs smoothly on all cylinders.
Keep Your Machine Earning
Dealer lead times for wiring harnesses can stretch to weeks. Ordering a replacement in advance, or as soon as faults begin to appear, keeps your project on schedule and avoids rental costs for a substitute machine.
Replace or Repair?
Splicing a damaged section can get a machine moving again, but each joint is a new point of failure. Old wire around the repair is usually just as aged as the part that broke, so the next fault is often not far away. A complete new harness resets the clock on the entire circuit.
Specifications
- Part Name: Injector Wire Harness
- Part Number: 6745-81-9210, 6745819210
- Condition: Aftermarket new
- Product Weight: 1.5 kg / 3.31 lbs
- Brand: TOPARTS
- Feature: Quality checked before shipping; built for heavy-duty use
Compatible Models
Komatsu PC300-7, PC340-7E0, PC350LL-7, SAA6D114E, WA430
Order & Delivery
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





