22243151 VOE22243151 D6E Engine Wire Harness for Volvo Excavator
Keep your Volvo EC160C EC180C working with the TOPARTS 22243151 VOE22243151 Engine E Wire Harness. It replaces the original harness one-for-one and is built for the vibration, heat and dirt that come with daily work on site.
Designed around the D6E engine configuration, it connects to the same points as the factory harness.
Specifications
- Part Name: Engine E Wire Harness
- Part Number: 22243151, VOE22243151
- Engine: D6E
- Condition: Aftermarket new
- Product Weight: 6 kg / 13.23 lbs
- Brand: TOPARTS
- Feature: Matches original routing and length; durable, heat-resistant insulation
Applicable Models
Volvo EC160C, EC180C, EC200B, EC210B, EC210C, EC220D, EC235C, etc
Why This Harness Matters
Every start, every throttle change and every load the excavator takes on is managed through this harness. It routes power and data between the ECM and the engine-mounted components, so a single damaged wire here can show up as a problem anywhere in the engine's behaviour.
Think of this harness as the communication line of the engine. Speed sensors, temperature senders, pressure switches and fuel system components all report back through it, and the controller sends its commands out along the same path.
On Volvo machines, wiring problems often appear as communication or sensor faults on the display. A new harness removes the wiring as a variable in the diagnosis.
Warning Signs to Watch For
Common warning signs are:
- Engine stalling, misfiring or running roughly at idle
- Gauges for engine temperature or oil pressure reading erratically
- Problems that come and go when the engine heats up or when the machine vibrates
- Visible heat damage, cracked insulation or chafed wires near the engine block
- Engine cranks but will not start, or starts only after several attempts
When diagnostics point to a circuit fault rather than a failed component, replacing the wiring is often the most cost-effective repair.
Confirming Fitment
Before ordering, compare the part number printed on the label of your original harness with 22243151 VOE22243151. It is also worth comparing the connector shapes and the number of branches with our product photos. If your machine's serial range or engine variant differs, send us your machine details and we will confirm compatibility before you buy.
Reducing Downtime
Dealer lead times for wiring harnesses can stretch to weeks. Ordering a replacement in advance, or as soon as faults begin to appear, keeps your project on schedule and avoids rental costs for a substitute machine.
Installation Guide
- Label each connector on the old harness with masking tape before you unplug anything.
- Photograph the routing, clip positions and ground points from several angles.
- Clean and inspect the ECM connector pins; bent pins cause more faults than people expect.
- Clear stored fault codes after installation and run the engine to working temperature to confirm everything reads correctly.
Made to Last on the Job Site
Each harness is produced under strict quality control, with wire gauges, colours and connector types matched to the original specification. Terminals are crimped for secure contact, and the bundle is protected with sleeving where the original used it.
Order & Delivery
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





