6754-11-8330 Engine Gasket Head Cover Wire Harness Assembly for Komatsu
Keep your Komatsu PC200-8MO PC220-8MO working with the TOPARTS 6754-11-8330 Engine Gasket Head Cover Wire Harness Assembly. It replaces the original harness one-for-one and is built for the vibration, heat and dirt that come with daily work on site.
Designed around the QSB6.7 engine configuration, it connects to the same points as the factory harness.
What This Harness Does
Think of this harness as the communication line of the engine. Speed sensors, temperature senders, pressure switches and fuel system components all report back through it, and the controller sends its commands out along the same path.
Every start, every throttle change and every load the excavator takes on is managed through this harness. It routes power and data between the ECM and the engine-mounted components, so a single damaged wire here can show up as a problem anywhere in the engine's behaviour.
Komatsu excavators are known for long service lives, and many keep working well past the point where their original wiring has aged. A new harness is often the key to keeping an older Komatsu reliable.
Construction and Quality
We check connector fit, wire continuity and overall layout before shipping, so the harness you receive is ready to install. The materials are chosen for the temperature range, vibration and contamination found on construction equipment.
Keep Your Machine Earning
An excavator sitting idle waiting for parts costs money every hour. Having the correct harness on hand means the repair becomes a scheduled job instead of an emergency, and the machine is back at work as soon as installation is finished.
Fitting Advice
- Label each connector on the old harness with masking tape before you unplug anything.
- Photograph the routing, clip positions and ground points from several angles.
- Clean and inspect the ECM connector pins; bent pins cause more faults than people expect.
- Keep the new harness clear of the exhaust manifold and turbocharger, and refit all heat shields.
FAQ
Can I replace only part of the harness?
For a reliable result we recommend replacing the complete harness, since the rest of the old wiring has aged under the same conditions.
How do I know it will fit my machine?
Match the part number on your old harness, or send us your machine model and serial number and we will confirm before you order.
Is this harness plug-and-play?
Yes. It is built to the original layout with matching connectors, so it installs in place of the original without cutting or splicing.
Warning Signs to Watch For
Typical signs include:
- Sudden loss of power or the engine entering a derated mode
- Problems that come and go when the engine heats up or when the machine vibrates
- Gauges for engine temperature or oil pressure reading erratically
- Engine cranks but will not start, or starts only after several attempts
If these symptoms persist after checking fuses, batteries and grounds, the wiring itself is the next thing to suspect.
Product Details
- Part Name: Engine Gasket Head Cover Wire Harness Assembly
- Part Number: 6754-11-8330, 6754118330
- Engine: QSB6.7
- Condition: Aftermarket new
- Product Weight: 5 kg / 11.02 lbs
- Brand: TOPARTS
- Feature: Quality checked before shipping; built for heavy-duty use
Application
Komatsu Excavator PC200-8MO PC220-8MO Cummins QSB6.7 Engine, etc
Shipping and Payment
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





