207-06-77411 207-06-D1140 Main Wiring Harness for Komatsu PC300-8M0 PC390LC-8M0
Looking for part 207-06-77411 207-06-D1140? This Main Wiring Harness is made for Komatsu PC300-8M0, PC390LC-8M0 excavators and reproduces the original harness design, from wire lengths and branch points to the connector types on each end.
Function Overview
Laid out around the frame and through the house of the excavator, this harness is the long-distance carrier of the electrical system. It ties together the cab controls, controllers, pump and valve solenoids, sensors and lighting into one connected network.
Where the engine harness serves the engine, the external or main harness serves the whole machine. It connects the major systems of the excavator, so when it is damaged the symptoms can appear in places that seem unrelated: lights, gauges, solenoids, starting and more.
Komatsu machines use monitor-based diagnostics, and a harness fault frequently appears as an error code that clears and returns. Replacing worn wiring is a common fix for these recurring codes.
How to Verify Compatibility
The fastest way to confirm fit is to match the part number 207-06-77411 207-06-D1140 against the tag on your old harness or your parts book. If the tag is missing or unreadable, a few clear photos of the connectors are usually enough for us to identify the right part.
How to Tell It Is Time for a New One
Watch for these symptoms:
- Monitor warnings that disappear when the machine is stopped
- Work lights, horn or wipers working only some of the time
- Blown fuses that keep recurring with no obvious cause
- Hydraulic functions slowing down or stopping because solenoids lose signal
- Several unrelated circuits failing at once
When diagnostics point to a circuit fault rather than a failed component, replacing the wiring is often the most cost-effective repair.
Fitting Advice
- Disconnect the battery isolator before starting.
- Work section by section, transferring clips and ties as you go, rather than removing the whole harness at once.
- Check every ground strap and clean its contact surface to bare metal.
- Add protective sleeving wherever the old harness showed signs of rubbing.
- Test lights, horn, solenoids and the monitor before refitting covers.
FAQ
What should I do if the part does not match?
Contact us with photos of the original and the new part. We will help you resolve the issue quickly.
Do I need special tools to install it?
Standard hand tools are usually enough. Labelling connectors and taking photos before removal makes the job much easier.
How long does shipping take?
Orders are shipped by express courier such as DHL, FedEx, UPS or TNT, and you will receive a tracking number by email as soon as your parcel leaves our warehouse.
Reducing Downtime
Electrical problems tend to get worse rather than better. Replacing a deteriorating harness at a planned service interval is far cheaper than dealing with a breakdown in the middle of a job, especially on remote sites.
Part Information
- Part Name: Main Wiring Harness
- Part Number: 207-06-77411, 207-06-D1140, 2070677411, 20706D1140
- Condition: Aftermarket new
- Product Weight: 24 kg / 52.91 lbs
- Brand: TOPARTS
- Feature: Matches original routing and length; durable, heat-resistant insulation
Compatible Models
Komatsu PC300-8M0, etc
Shipping and Payment
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





