YN13E01137P4 External Wire Harness for Kobelco SK200-6 SK210-6
Keep your Kobelco SK200-6 SK210-6 working with the TOPARTS YN13E01137P4 External Wire Harness. It replaces the original harness one-for-one and is built for the vibration, heat and dirt that come with daily work on site.
How It Works on Your Machine
Where the engine harness serves the engine, the external or main harness serves the whole machine. It connects the major systems of the excavator, so when it is damaged the symptoms can appear in places that seem unrelated: lights, gauges, solenoids, starting and more.
This is the backbone of the machine's electrical system. The External Wire Harness runs along the frame and upper structure, distributing power from the batteries and fuse box and carrying signals between the cab, the engine compartment, the hydraulic system and the work lights.
Kobelco excavators are valued for fuel efficiency and smooth hydraulics, both of which depend on accurate electronic control and clean signals through the wiring.
Common Symptoms of a Failing Harness
Common warning signs are:
- Starting problems traced to wiring rather than the battery or starter
- Hydraulic functions slowing down or stopping because solenoids lose signal
- Rodent damage, crushed sections or wires worn through where the harness rubs the frame
- Work lights, horn or wipers working only some of the time
- Monitor warnings that disappear when the machine is stopped
When diagnostics point to a circuit fault rather than a failed component, replacing the wiring is often the most cost-effective repair.
Installation Guide
- Disconnect the battery isolator before starting.
- Work section by section, transferring clips and ties as you go, rather than removing the whole harness at once.
- Check every ground strap and clean its contact surface to bare metal.
- Add protective sleeving wherever the old harness showed signs of rubbing.
- Test lights, horn, solenoids and the monitor before refitting covers.
Repair vs. Replacement
Patching wiring takes time: tracing the fault, cutting, crimping and sealing, often in an awkward position. When the insulation is hardened along the whole length, that time is better spent fitting a new harness that solves every weak spot at once.
Common Questions
What should I do if the part does not match?
Contact us with photos of the original and the new part. We will help you resolve the issue quickly.
Can I replace only part of the harness?
For a reliable result we recommend replacing the complete harness, since the rest of the old wiring has aged under the same conditions.
Is this harness plug-and-play?
Yes. It is built to the original layout with matching connectors, so it installs in place of the original without cutting or splicing.
Keep Your Machine Earning
Dealer lead times for wiring harnesses can stretch to weeks. Ordering a replacement in advance, or as soon as faults begin to appear, keeps your project on schedule and avoids rental costs for a substitute machine.
Part Information
- Part Name: External Wire Harness
- Part Number: YN13E01137P4
- Condition: Aftermarket new
- Product Weight: 8 kg / 17.64 lbs
- Brand: TOPARTS
- Feature: Strict quality control standards; stable performance and high reliability
Applicable Models
Kobelco SK200-6 Excavator, etc
Shipping and Payment
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





