1-82641351-1 Wire Harness for 6HK1 Engine Hitachi Excavator ZX330-3 SH350-5
Part number 1-82641351-1 is the Engine Wire Harness used on Hitachi ZX330-3, ZX350-3, SH350-5 excavators. This aftermarket replacement from TOPARTS is designed to fit in place of the original without cutting, splicing or rerouting.
Designed around the 6HK1 engine configuration, it connects to the same points as the factory harness.
Product Details
- Part Name: Engine Wire Harness
- Part Number: 1-82641351-1, 1826413511
- Engine: 6HK1
- Condition: Aftermarket new
- Product Weight: 3.5 kg / 7.72 lbs
- Brand: TOPARTS
- Warranty: 12 months
- Feature: Strict quality control standards; stable performance and high reliability
Applicable Models
6HK1 Engine, Hitachi Excavator ZX330-3 ZX350-3, etc
Its Role in the Machine
Every start, every throttle change and every load the excavator takes on is managed through this harness. It routes power and data between the ECM and the engine-mounted components, so a single damaged wire here can show up as a problem anywhere in the engine's behaviour.
The Engine Wire Harness is the nerve center of the engine bay. It links the engine control module to the sensors, injectors and actuators that keep combustion on target, carrying every signal the ECM needs to read speed, temperature and pressure and respond in milliseconds.
Hitachi ZAXIS and EX series machines combine electronic engine control with electronically managed hydraulics, so both systems depend on sound wiring to deliver their rated performance.
Frequently Asked Questions
Is this a genuine or aftermarket part?
Please see the Condition line in the specifications above. Every part is checked for fit and continuity before shipping.
Is this harness plug-and-play?
Yes. It is built to the original layout with matching connectors, so it installs in place of the original without cutting or splicing.
What should I do if the part does not match?
Contact us with photos of the original and the new part. We will help you resolve the issue quickly.
Looking After Your Wiring
Rodents are a common cause of harness damage on machines that sit for long periods. Keeping the cab and engine compartment clean of food waste, and using deterrents where machines are parked for a while, helps protect the new wiring.
Built for Heavy-Duty Work
We check connector fit, wire continuity and overall layout before shipping, so the harness you receive is ready to install. The materials are chosen for the temperature range, vibration and contamination found on construction equipment.
Signs Your Harness Needs Replacing
You may notice:
- Fault codes for sensors, injectors or the ECM appearing on the monitor
- Engine stalling, misfiring or running roughly at idle
- Gauges for engine temperature or oil pressure reading erratically
- Sudden loss of power or the engine entering a derated mode
- Problems that come and go when the engine heats up or when the machine vibrates
Intermittent faults like these are classic signs of ageing wiring, and they rarely improve on their own.
Before and During Installation
- Label each connector on the old harness with masking tape before you unplug anything.
- Photograph the routing, clip positions and ground points from several angles.
- Clean and inspect the ECM connector pins; bent pins cause more faults than people expect.
- Keep the new harness clear of the exhaust manifold and turbocharger, and refit all heat shields.
- Clear stored fault codes after installation and run the engine to working temperature to confirm everything reads correctly.
Order & Delivery
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





