2864514 4952750 YUBP-09690 Genuine Wire Harness for Cummins QSM11 ECM Engine
When the original harness on your Cummins QSM11 has worn out, the 2864514 4952750 Engine Genuine Wire Harness is a straightforward way to get the machine back to full function. It is made to the same layout as the original, with matching connectors at every branch.
It is used with the QSM11 engine and is matched to that engine's sensor and connector layout.
Part Information
- Part Name: Engine Genuine Wire Harness
- Part Number: 2864514, 4952750, YUBP-09690, YUBP09690
- Engine: QSM11
- Condition: Genuine new
- Product Weight: 3 kg / 6.61 lbs
- Brand: TOPARTS
- Feature: Matches original routing and length; durable, heat-resistant insulation
Application
Cummins QSM11
How It Works on Your Machine
Think of this harness as the communication line of the engine. Speed sensors, temperature senders, pressure switches and fuel system components all report back through it, and the controller sends its commands out along the same path.
Mounted directly on the engine, this harness bundles the circuits that connect the electronic control unit with the parts doing the real work: sensors that measure, and actuators that respond. Clean, uninterrupted signals here are what allow the engine to run smoothly and efficiently.
On electronically controlled Cummins engines, a healthy harness is essential for accurate fueling and fault-free ECM communication.
How to Verify Compatibility
Model names are not always enough to confirm fitment, because manufacturers sometimes change harness designs within a model's production run. Check the part number on your existing harness, or send us your machine model and serial number, and we will check it for you.
How to Tell It Is Time for a New One
Watch for these symptoms:
- Problems that come and go when the engine heats up or when the machine vibrates
- Visible heat damage, cracked insulation or chafed wires near the engine block
- Engine cranks but will not start, or starts only after several attempts
- Engine stalling, misfiring or running roughly at idle
- Fault codes for sensors, injectors or the ECM appearing on the monitor
When diagnostics point to a circuit fault rather than a failed component, replacing the wiring is often the most cost-effective repair.
Why a New Harness Beats Patching
Patching wiring takes time: tracing the fault, cutting, crimping and sealing, often in an awkward position. When the insulation is hardened along the whole length, that time is better spent fitting a new harness that solves every weak spot at once.
Before and During Installation
- Label each connector on the old harness with masking tape before you unplug anything.
- Photograph the routing, clip positions and ground points from several angles.
- Keep the new harness clear of the exhaust manifold and turbocharger, and refit all heat shields.
- Clear stored fault codes after installation and run the engine to working temperature to confirm everything reads correctly.
Construction and Quality
TOPARTS harnesses are made to the original layout so that every connector reaches its component without strain. Protective conduit and tape guard the wires against abrasion, heat and oil in the engine bay and around the frame.
Shipping and Payment
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





