LQ13E01072P2 External Wire Harness for Kobelco Excavator SK200-6E
Part number LQ13E01072P2 is the External Wire Harness used on Kobelco SK200-6E, SK210-6E excavators. This aftermarket replacement from TOPARTS is designed to fit in place of the original without cutting, splicing or rerouting.
Part Information
- Part Name: External Wire Harness
- Part Number: LQ13E01072P2
- Condition: Aftermarket new
- Product Weight: 6 kg / 13.23 lbs
- Brand: TOPARTS
- Warranty: 6 months
- Feature: Matches original routing and length; durable, heat-resistant insulation
Applicable Models
Kobelco SK200-6E SK210-6E
Why This Harness Matters
Because it runs through the most exposed areas of the machine, the main harness takes more abuse than almost any other electrical part. Swinging, vibration, dust, washdowns and rodents all take their toll, which is why it is one of the most commonly replaced harnesses on older machines.
This is the backbone of the machine's electrical system. The External Wire Harness runs along the frame and upper structure, distributing power from the batteries and fuse box and carrying signals between the cab, the engine compartment, the hydraulic system and the work lights.
Kobelco excavators are valued for fuel efficiency and smooth hydraulics, both of which depend on accurate electronic control and clean signals through the wiring.
Construction and Quality
We check connector fit, wire continuity and overall layout before shipping, so the harness you receive is ready to install. The materials are chosen for the temperature range, vibration and contamination found on construction equipment.
Before and During Installation
- Work section by section, transferring clips and ties as you go, rather than removing the whole harness at once.
- Check every ground strap and clean its contact surface to bare metal.
- Add protective sleeving wherever the old harness showed signs of rubbing.
- Test lights, horn, solenoids and the monitor before refitting covers.
Confirming Fitment
Model names are not always enough to confirm fitment, because manufacturers sometimes change harness designs within a model's production run. Check the part number on your existing harness, or send us your machine model and serial number, and we will check it for you.
Common Questions
What should I do if the part does not match?
Contact us with photos of the original and the new part. We will help you resolve the issue quickly.
Do I need special tools to install it?
Standard hand tools are usually enough. Labelling connectors and taking photos before removal makes the job much easier.
Can I replace only part of the harness?
For a reliable result we recommend replacing the complete harness, since the rest of the old wiring has aged under the same conditions.
How to Tell It Is Time for a New One
Watch for these symptoms:
- Monitor warnings that disappear when the machine is stopped
- Work lights, horn or wipers working only some of the time
- Starting problems traced to wiring rather than the battery or starter
- Hydraulic functions slowing down or stopping because solenoids lose signal
- Blown fuses that keep recurring with no obvious cause
When diagnostics point to a circuit fault rather than a failed component, replacing the wiring is often the most cost-effective repair.
Order & Delivery
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





