Hydraulic Pump Wiring Harness for Hitachi EX120-5
Electrical faults can stop an excavator as surely as a mechanical failure. The Hydraulic Pump Wiring Harness replaces damaged or aged wiring on Hitachi EX120-5 excavator and returns the affected circuits to dependable operation.
How It Works on Your Machine
The hydraulic pump harness connects the pump controller with the proportional solenoids, pressure sensors and swash plate control on the main pump. It is how the electronics tell the pump how much flow to deliver and how the controller learns what the pump is actually doing.
Positioned in the pump compartment, this harness is surrounded by heat, vibration and hydraulic oil. It feeds the pump's solenoid valves and returns pressure readings to the controller, which uses them to balance hydraulic power against engine output.
Hitachi excavators are popular on the used market, and harness replacement is one of the most effective ways to restore an older Hitachi to dependable everyday use.
Construction and Quality
Each harness is produced under strict quality control, with wire gauges, colours and connector types matched to the original specification. Terminals are crimped for secure contact, and the bundle is protected with sleeving where the original used it.
Confirming Fitment
Model names are not always enough to confirm fitment, because manufacturers sometimes change harness designs within a model's production run. Check the part number on your existing harness, or send us your machine model and serial number, and we will check it for you.
Reducing Downtime
Electrical problems tend to get worse rather than better. Replacing a deteriorating harness at a planned service interval is far cheaper than dealing with a breakdown in the middle of a job, especially on remote sites.
Fitting Advice
- Relieve hydraulic pressure and let the system cool before working near the pump.
- Wipe oil residue off connectors before unplugging them.
- Check the pump solenoids and pressure sensors for damage while the harness is out.
- Secure the new harness away from hot hydraulic lines with the original clamps.
When to Replace It
Common warning signs are:
- Work modes having little or no effect on performance
- Engine bogging down or stalling under heavy hydraulic load
- Hydraulic functions feeling slow or weak
- Pump or solenoid fault codes on the monitor
If these symptoms persist after checking fuses, batteries and grounds, the wiring itself is the next thing to suspect.
Part Information
- Part Name: Hydraulic Pump Wiring Harness
- Condition: Brand new
- Product Weight: 4.5 kg / 9.92 lbs
- Brand: TOPARTS
- Feature: Matches original routing and length; durable, heat-resistant insulation
Applicable Models
Hitachi EX120-5
Shipping and Payment
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.


