LQ13E01072P2 External Harness for SK210-6E SK200-6E Excavator Parts
If diagnosis has led you to the wiring, the LQ13E01072P2 External Harness gives you a complete, new harness for Kobelco SK210-6E, SK200-6E excavators instead of a patchwork of repairs on old, brittle wire.
Part Information
- Part Name: External Harness
- Part Number: LQ13E01072P2
- Condition: Aftermarket new
- Product Weight: 6 kg / 13.23 lbs
- Brand: TOPARTS
- Feature: Quality checked before shipping; built for heavy-duty use
Fits the Following Machines
Kobelco SK210-6E, SK200-6E
How It Works on Your Machine
Where the engine harness serves the engine, the external or main harness serves the whole machine. It connects the major systems of the excavator, so when it is damaged the symptoms can appear in places that seem unrelated: lights, gauges, solenoids, starting and more.
Laid out around the frame and through the house of the excavator, this harness is the long-distance carrier of the electrical system. It ties together the cab controls, controllers, pump and valve solenoids, sensors and lighting into one connected network.
Kobelco excavators are valued for fuel efficiency and smooth hydraulics, both of which depend on accurate electronic control and clean signals through the wiring.
Signs Your Harness Needs Replacing
Typical signs include:
- Starting problems traced to wiring rather than the battery or starter
- Monitor warnings that disappear when the machine is stopped
- Work lights, horn or wipers working only some of the time
- Rodent damage, crushed sections or wires worn through where the harness rubs the frame
When diagnostics point to a circuit fault rather than a failed component, replacing the wiring is often the most cost-effective repair.
Construction and Quality
We check connector fit, wire continuity and overall layout before shipping, so the harness you receive is ready to install. The materials are chosen for the temperature range, vibration and contamination found on construction equipment.
Repair vs. Replacement
Splicing a damaged section can get a machine moving again, but each joint is a new point of failure. Old wire around the repair is usually just as aged as the part that broke, so the next fault is often not far away. A complete new harness resets the clock on the entire circuit.
Tips for a Smooth Installation
- Disconnect the battery isolator before starting.
- Work section by section, transferring clips and ties as you go, rather than removing the whole harness at once.
- Add protective sleeving wherever the old harness showed signs of rubbing.
- Test lights, horn, solenoids and the monitor before refitting covers.
Extending Harness Life
Rodents are a common cause of harness damage on machines that sit for long periods. Keeping the cab and engine compartment clean of food waste, and using deterrents where machines are parked for a while, helps protect the new wiring.
Order & Delivery
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





