KHR16002 Cabin Internal Wire Harness for Case CX210B Sumitomo SH200-5
Restore reliable electrical performance to your Case CX240BLR CX130B with the KHR16002 Cabin Internal Wire Harness. Built as a direct replacement for the original part, it matches the factory routing, connector layout and length, so it goes in where the old one came out.
Why This Harness Matters
Protected from weather but not from wear, the cab harness flexes every time a seat is adjusted, a console is moved or a panel is opened. Over the years, these small movements loosen terminals and fatigue wires, especially behind the seat and under the floor plate.
Inside the cab, this harness ties the monitor panel, controller, key switch and control switches into one circuit network. When it starts to fail, the first signs are usually in the cab itself: dead switches, flickering displays or controls that respond only some of the time.
On Case machines, wiring faults frequently show as monitor warnings or controller errors that disappear and return.
Installation Tips
- Remove the seat or console covers as needed to get clear access.
- Unplug the monitor and controller connectors carefully and check their locking tabs.
- Route the harness exactly as the original to avoid pinching under floor plates or seat rails.
- Test every switch and the monitor before refitting the panels.
Common Symptoms of a Failing Harness
You may notice:
- Monitor flickering, going blank or resetting while working
- Joystick or work mode functions not responding
- Key switch or start circuit failing intermittently
- Switches on the console that do nothing or work only sometimes
Intermittent faults like these are classic signs of ageing wiring, and they rarely improve on their own.
Keep Your Machine Earning
Electrical problems tend to get worse rather than better. Replacing a deteriorating harness at a planned service interval is far cheaper than dealing with a breakdown in the middle of a job, especially on remote sites.
Why a New Harness Beats Patching
Patching wiring takes time: tracing the fault, cutting, crimping and sealing, often in an awkward position. When the insulation is hardened along the whole length, that time is better spent fitting a new harness that solves every weak spot at once.
Check Fitment Before Ordering
The fastest way to confirm fit is to match the part number KHR16002 against the tag on your old harness or your parts book. If the tag is missing or unreadable, a few clear photos of the connectors are usually enough for us to identify the right part.
Part Information
- Part Name: Cabin Internal Wire Harness
- Part Number: KHR16002
- Condition: Genuine new
- Product Weight: 6 kg / 13.23 lbs
- Brand: TOPARTS
- Feature: Original connector layout; plug-and-play installation
Applicable Models
CASE CX240BLR, CX130B, CX290B, CX160B, etc
Order & Delivery
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





