207-06-61112 Internal Wiring Harness for Komatsu PC300-6 PC400-6 PC450-6
Electrical faults can stop an excavator as surely as a mechanical failure. The 207-06-61112 Internal Wiring Harness replaces damaged or aged wiring on Komatsu PC300-6, PC350-6, PC400-6, PC450-6, PC750, PC800 excavators and returns the affected circuits to dependable operation.
Specs at a Glance
- Part Name: Internal Wiring Harness
- Part Number: 207-06-61112, 2070661112
- Condition: Aftermarket new
- Product Weight: 2.5 kg / 5.51 lbs
- Brand: TOPARTS
- Feature: Quality checked before shipping; built for heavy-duty use
Applicable Models
Komatsu PC300-6, PC350-6, PC400-6, PC450-6, PC750, PC800, etc
Why This Harness Matters
The internal harness lives inside the operator's cab and connects everything the operator touches and sees: the monitor, switch panels, joysticks, key switch, controllers and relays. It is the link between the operator's commands and the rest of the machine.
Protected from weather but not from wear, the cab harness flexes every time a seat is adjusted, a console is moved or a panel is opened. Over the years, these small movements loosen terminals and fatigue wires, especially behind the seat and under the floor plate.
Komatsu excavators are known for long service lives, and many keep working well past the point where their original wiring has aged. A new harness is often the key to keeping an older Komatsu reliable.
FAQ
How do I know it will fit my machine?
Match the part number on your old harness, or send us your machine model and serial number and we will confirm before you order.
Is this a genuine or aftermarket part?
Please see the Condition line in the specifications above. Every part is checked for fit and continuity before shipping.
What should I do if the part does not match?
Contact us with photos of the original and the new part. We will help you resolve the issue quickly.
Extending Harness Life
Replace damaged clamps and protective sleeving whenever you find them. A harness that is allowed to move against the frame will wear through eventually, no matter how good the wire is.
How to Tell It Is Time for a New One
You may notice:
- Key switch or start circuit failing intermittently
- Monitor flickering, going blank or resetting while working
- Faults that appear when the seat or console is moved
- Switches on the console that do nothing or work only sometimes
When diagnostics point to a circuit fault rather than a failed component, replacing the wiring is often the most cost-effective repair.
Replace or Repair?
Harness repairs are hard to do well in the field. Moisture gets into joints, tape loosens with heat, and intermittent faults come back. Replacing the harness gives you factory-style connections throughout and makes future troubleshooting far simpler.
Fitting Advice
- Remove the seat or console covers as needed to get clear access.
- Unplug the monitor and controller connectors carefully and check their locking tabs.
- Route the harness exactly as the original to avoid pinching under floor plates or seat rails.
- Test every switch and the monitor before refitting the panels.
Shipping and Payment
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





