6222-83-4331 6222-83-4330 Excavator 6D108 Engine Wiring Harness PC300-6 PC350-6
Part number 6222-83-4331 6222-83-4330 is the Engine Wiring Harness used on Komatsu PC300-6, PC350-6 excavators. This aftermarket replacement from TOPARTS is designed to fit in place of the original without cutting, splicing or rerouting.
Designed around the 6D108 engine configuration, it connects to the same points as the factory harness.
Specs at a Glance
- Part Name: Engine Wiring Harness
- Part Number: 6222-83-4331, 6222-83-4330, 6222834331, 6222834330
- Engine: 6D108
- Condition: Aftermarket new
- Product Weight: 3.5 kg / 7.72 lbs
- Brand: TOPARTS
- Feature: Matches original routing and length; durable, heat-resistant insulation
Fits the Following Machines
Komatsu PC300-6, PC350-6
Function Overview
The Engine Wiring Harness is the nerve center of the engine bay. It links the engine control module to the sensors, injectors and actuators that keep combustion on target, carrying every signal the ECM needs to read speed, temperature and pressure and respond in milliseconds.
Think of this harness as the communication line of the engine. Speed sensors, temperature senders, pressure switches and fuel system components all report back through it, and the controller sends its commands out along the same path.
Komatsu machines use monitor-based diagnostics, and a harness fault frequently appears as an error code that clears and returns. Replacing worn wiring is a common fix for these recurring codes.
Signs Your Harness Needs Replacing
Common warning signs are:
- Fault codes for sensors, injectors or the ECM appearing on the monitor
- Engine stalling, misfiring or running roughly at idle
- Engine cranks but will not start, or starts only after several attempts
- Problems that come and go when the engine heats up or when the machine vibrates
When diagnostics point to a circuit fault rather than a failed component, replacing the wiring is often the most cost-effective repair.
Keep Your Machine Earning
An excavator sitting idle waiting for parts costs money every hour. Having the correct harness on hand means the repair becomes a scheduled job instead of an emergency, and the machine is back at work as soon as installation is finished.
Installation Guide
- Label each connector on the old harness with masking tape before you unplug anything.
- Photograph the routing, clip positions and ground points from several angles.
- Clean and inspect the ECM connector pins; bent pins cause more faults than people expect.
- Keep the new harness clear of the exhaust manifold and turbocharger, and refit all heat shields.
- Clear stored fault codes after installation and run the engine to working temperature to confirm everything reads correctly.
Confirming Fitment
Before ordering, compare the part number printed on the label of your original harness with 6222-83-4331 6222-83-4330. It is also worth comparing the connector shapes and the number of branches with our product photos. If your machine's serial range or engine variant differs, send us your machine details and we will confirm compatibility before you buy.
Construction and Quality
We check connector fit, wire continuity and overall layout before shipping, so the harness you receive is ready to install. The materials are chosen for the temperature range, vibration and contamination found on construction equipment.
Shipping and Payment
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





