YN14E01082P1 Cabin inner Wiring Harness for SK200-6E SK200LC-6E
Looking for part YN14E01082P1? This Cabin Inner Wiring Harness is made for Kobelco SK200-6E, SK200LC-6E excavators and reproduces the original harness design, from wire lengths and branch points to the connector types on each end.
Part Information
- Part Name: Cabin Inner Wiring Harness
- Part Number: YN14E01082P1
- Condition: Aftermarket new
- Product Weight: 8 kg / 17.64 lbs
- Brand: TOPARTS
- Warranty: 6 months
- Feature: Original connector layout; plug-and-play installation
Compatible Models
Kobelco SK200-6E
Its Role in the Machine
The internal harness lives inside the operator's cab and connects everything the operator touches and sees: the monitor, switch panels, joysticks, key switch, controllers and relays. It is the link between the operator's commands and the rest of the machine.
Inside the cab, this harness ties the monitor panel, controller, key switch and control switches into one circuit network. When it starts to fail, the first signs are usually in the cab itself: dead switches, flickering displays or controls that respond only some of the time.
Many Kobelco machines work in demanding conditions across Asia, the Middle East and beyond, and replacement harnesses are a routine part of keeping them productive.
When to Replace It
Typical signs include:
- Joystick or work mode functions not responding
- Monitor flickering, going blank or resetting while working
- Key switch or start circuit failing intermittently
- Burnt smell or discoloured connectors behind panels
- Switches on the console that do nothing or work only sometimes
When diagnostics point to a circuit fault rather than a failed component, replacing the wiring is often the most cost-effective repair.
Frequently Asked Questions
Can I replace only part of the harness?
For a reliable result we recommend replacing the complete harness, since the rest of the old wiring has aged under the same conditions.
Is this a genuine or aftermarket part?
Please see the Condition line in the specifications above. Every part is checked for fit and continuity before shipping.
Do I need special tools to install it?
Standard hand tools are usually enough. Labelling connectors and taking photos before removal makes the job much easier.
Construction and Quality
We check connector fit, wire continuity and overall layout before shipping, so the harness you receive is ready to install. The materials are chosen for the temperature range, vibration and contamination found on construction equipment.
Before and During Installation
- Remove the seat or console covers as needed to get clear access.
- Unplug the monitor and controller connectors carefully and check their locking tabs.
- Route the harness exactly as the original to avoid pinching under floor plates or seat rails.
- Test every switch and the monitor before refitting the panels.
Why a New Harness Beats Patching
Patching wiring takes time: tracing the fault, cutting, crimping and sealing, often in an awkward position. When the insulation is hardened along the whole length, that time is better spent fitting a new harness that solves every weak spot at once.
Ordering Information
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





