0004777 External Wiring Harness for Hitachi ZX330 ZX370
If diagnosis has led you to the wiring, the 0004777 External Wiring Harness gives you a complete, new harness for Hitachi ZX330, ZX370MTH, ZX370 excavators instead of a patchwork of repairs on old, brittle wire.
Specifications
- Part Name: External Wiring Harness
- Part Number: 0004777
- Condition: Aftermarket new
- Product Weight: 12 kg / 26.46 lbs
- Brand: TOPARTS
- Feature: Quality checked before shipping; built for heavy-duty use
Application
Hitachi ZX330, ZX370MTH, ETC
Why This Harness Matters
This is the backbone of the machine's electrical system. The External Wiring Harness runs along the frame and upper structure, distributing power from the batteries and fuse box and carrying signals between the cab, the engine compartment, the hydraulic system and the work lights.
Because it runs through the most exposed areas of the machine, the main harness takes more abuse than almost any other electrical part. Swinging, vibration, dust, washdowns and rodents all take their toll, which is why it is one of the most commonly replaced harnesses on older machines.
Hitachi ZAXIS and EX series machines combine electronic engine control with electronically managed hydraulics, so both systems depend on sound wiring to deliver their rated performance.
Installation Guide
- Disconnect the battery isolator before starting.
- Work section by section, transferring clips and ties as you go, rather than removing the whole harness at once.
- Check every ground strap and clean its contact surface to bare metal.
- Add protective sleeving wherever the old harness showed signs of rubbing.
- Test lights, horn, solenoids and the monitor before refitting covers.
Make Sure It Fits
Before ordering, compare the part number printed on the label of your original harness with 0004777. It is also worth comparing the connector shapes and the number of branches with our product photos. If your machine's serial range or engine variant differs, send us your machine details and we will confirm compatibility before you buy.
Keeping the New Harness in Good Shape
Rodents are a common cause of harness damage on machines that sit for long periods. Keeping the cab and engine compartment clean of food waste, and using deterrents where machines are parked for a while, helps protect the new wiring.
Why Full Replacement Pays Off
Splicing a damaged section can get a machine moving again, but each joint is a new point of failure. Old wire around the repair is usually just as aged as the part that broke, so the next fault is often not far away. A complete new harness resets the clock on the entire circuit.
How to Tell It Is Time for a New One
Common warning signs are:
- Work lights, horn or wipers working only some of the time
- Monitor warnings that disappear when the machine is stopped
- Hydraulic functions slowing down or stopping because solenoids lose signal
- Blown fuses that keep recurring with no obvious cause
- Rodent damage, crushed sections or wires worn through where the harness rubs the frame
When diagnostics point to a circuit fault rather than a failed component, replacing the wiring is often the most cost-effective repair.
Shipping and Payment
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





