207-06-61111 Internal Wiring Harness for Komatsu PC300-6 PC350-6 PC400-6
Electrical faults can stop an excavator as surely as a mechanical failure. The 207-06-61111 Internal Wiring Harness replaces damaged or aged wiring on Komatsu PC300-6, PC350-6, PC400-6, PC450-6, PC750, PC800 excavators and returns the affected circuits to dependable operation.
Part Information
- Part Name: Internal Wiring Harness
- Part Number: 207-06-61111, 2070661111
- Condition: Aftermarket new
- Product Weight: 2.5 kg / 5.51 lbs
- Brand: TOPARTS
- Feature: Matches original routing and length; durable, heat-resistant insulation
Compatible Models
Komatsu PC300-6, PC350-6, PC400-6, PC450-6, PC750, PC800, etc
Why This Harness Matters
Protected from weather but not from wear, the cab harness flexes every time a seat is adjusted, a console is moved or a panel is opened. Over the years, these small movements loosen terminals and fatigue wires, especially behind the seat and under the floor plate.
Inside the cab, this harness ties the monitor panel, controller, key switch and control switches into one circuit network. When it starts to fail, the first signs are usually in the cab itself: dead switches, flickering displays or controls that respond only some of the time.
Komatsu machines use monitor-based diagnostics, and a harness fault frequently appears as an error code that clears and returns. Replacing worn wiring is a common fix for these recurring codes.
How to Tell It Is Time for a New One
Typical signs include:
- Switches on the console that do nothing or work only sometimes
- Joystick or work mode functions not responding
- Monitor flickering, going blank or resetting while working
- Faults that appear when the seat or console is moved
If these symptoms persist after checking fuses, batteries and grounds, the wiring itself is the next thing to suspect.
The Cost of Waiting
Electrical problems tend to get worse rather than better. Replacing a deteriorating harness at a planned service interval is far cheaper than dealing with a breakdown in the middle of a job, especially on remote sites.
Installation Tips
- Remove the seat or console covers as needed to get clear access.
- Unplug the monitor and controller connectors carefully and check their locking tabs.
- Route the harness exactly as the original to avoid pinching under floor plates or seat rails.
- Test every switch and the monitor before refitting the panels.
Why Full Replacement Pays Off
Patching wiring takes time: tracing the fault, cutting, crimping and sealing, often in an awkward position. When the insulation is hardened along the whole length, that time is better spent fitting a new harness that solves every weak spot at once.
Confirming Fitment
The fastest way to confirm fit is to match the part number 207-06-61111 against the tag on your old harness or your parts book. If the tag is missing or unreadable, a few clear photos of the connectors are usually enough for us to identify the right part.
Shipping and Payment
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.





